ICP® Vibration Transmitter

Model 682B03     

 

ICP 4-20 mA Transmitter

DIN-rail mount vibration transmitter supplies ICP® power to 100 mV/g analog accelerometers and outputs a 4-20 mA signal proportional to overall vibration. Output signal can be scaled in acceleration, velocity or displacement.

• Channels: 1
• Power Required: DC power

 

  

Bearing Fault Detector

Model 682A05     

 

Bearing Fault Detector, DIN rail mount vibration transmitter (for use w/ICP® sensor), dual 4 to 20 mA outputs for overall and peak vibration

Provides early warning of bearing and gear faults, detects impacting associated with spalling, cracking, and lubrication problems, outputs dual 4-20 mA signals for overall vibration and peak acceleration, provides excitation for ICP® accelerometers.
Product Data Sheet

• Output Range: (Linear Scale) 4 to 20 mA
• Measurement Range: (Fault Detector) 50 g
• Din Rail Mount: 1.38 in (35 mm)

 

Related Products

  

24 VDC DIN Rail Mount Power Supply

Model 682A01     

 

DIN rail mount 24 VDC power supply, 120-230 VAC input

24 VDC Power Supply; 120 to 230 VAC powered; DIN rail mount; 3.75 kV isolation; 1A maximum
Product Data Sheet

• Power Required: 85-264 VAC / 95-350 VDC
• Output Voltage: 24 VDC
• Output Current: 1.0 amps

 

  

ICP® Sensor Signal Conditioner

Model 682A02     

 

DIN rail mount ICP® signal conditioner, 24 VDC input

ICP Signal Conditioner, Din Rail mounted. 18 VDC excitation voltage, with internally jumper selectable excitation current and voltage gain.

• Channels: 1
• Voltage Gain: 1/10/100
• Frequency Range: (±1dB) 60 to 6000000 cpm (1 to 100000 Hz)
• Power Required: (Standard) DC power

 

  

Universal Transmitter

Model 682A06     

 

DIN rail mount controller for use with universal inputs, 2 form A relays

Fully programmable universal transmitter with current output, voltage output, and two relay outputs. Provides loop power for 2-wire, 4-20 mA sensors and transmitters, and accepts mA, VDC, RTD, TC, linear resistance, and potentiometer inputs. Fully programmable via detachable display (sold separately- Model 070A80 ), and operates from 19.2 to 300 VDC, or 21.5 to 253 VAC power.
Product Data Sheet

 

  

Universal Transmitter w/ICP Power

Model 682A16     

 

ICP Alarm Module

Fully programmable universal transmitter with current output, voltage output, and two relay outputs. Provides ICP excitation for analog 100 mV/g accelerometers. Fully programmable via detachable display (sold separately- Model 070A80 ), and operates from 19.2 to 300 VDC, or 21.5 to 253 VAC power.

 

  

Front Panel Display

Model 070A80     

 

Detachable front panel display and programmer for Model 682A06 Universal Transmitter

This detachable display should be used in conjunction with model 682A06 universal transmitter. It can be used on multiple transmitters, and has the ability to store programmed data for quick installation on subsequent units. Programming access can be restricted with password protection.
Product Data Sheet

 

Bearing Fault Detector
IMI's Bearing Fault Dector (BFD) is used in conjunction with an ICP accelerometer and provides early warning of impending bearing failure. In addition to an overall vibration output the BFD features a second 4-20 mA output scaled for impacts caused by pitting in the housing of rolling-element bearings.

Model 682A06 - Universal Transmitter
The Universal Transmitter features a removeable LCD display, dual relays with time delays and 4-20 mA re-transmit. A cost-effective method of overall vibration monitoring it can also be used in conjunction with non-IMI products such as RTD's.

Series 682 Din-Rail Signal Conditioners
Take a closer look at IMI's DIN-rail product line featuring the 682A03 ICP signal conditioner with 4-20 mA re-transmit and BNC for raw vibration pickup. The brochure also detials IMI's new 682A16 universal transmitter.

Smart Vibration Sensors
Brochure details IMI's groundbreaking series of USB programmable vibration sensors. Learn about our smart 4-20 mA vibration transmitter, bearing fault detector, reciprocating machinery protector and vibration switch.