Sign Up Now
FREE E-Newsletter

Search


About Us

ABOUT SSL CERTIFICATES
Home > 4-20 mA Transmitters > DIN-rail Mount Modules > 682A01
 

 

24 VDC DIN Rail Mount Power Supply
Model 682A01     
 
DIN rail mount 24 VDC power supply, 120-230 VAC input

24 VDC Power Supply; 120 to 230 VAC powered; DIN rail mount; 3.75 kV isolation; 1A maximum
Product Data Sheet

  • Power Required: 85-264 VAC / 95-350 VDC
  • Output Voltage: 24 VDC
  • Output Current: 1.0 amps
 
 
SpecificationsDrawingProduct ManualPicture 
PERFORMANCE ENGLISH SI
MTBF >500000h
>500000h
Efficiency >80%
>80%
CONTROL INTERFACE
Display LED
LED
ENVIRONMENTAL
Temperature Range (Operating) -13 to 158 °F
-25 to 70 °C
Temperature Range (Storage) -40 to 185 °F
-40 to 85 °C
Humidity Range (Non-Condensing) <95 %
<95 %
ELECTRICAL
Power Required 85-264 VAC / 95-350 VDC
85-264 VAC / 95-350 VDC
Output Voltage 24 VDC
24 VDC
Output Current 1.0 amps
1.0 amps
Input Frequency 45 to 63 Hz
45 to 63 Hz
Inrush Current (@ 25 deg C) <15A
<15A
Current Consumption (230/120 VAC) 0.3/0.5A
0.3/0.5A
Fuse 1.25A/250V
1.25A/250V
Mains Buffering >20/110ms (120/230 VAC)
>20/110ms (120/230 VAC)
Surge Voltage Protection Varistor
Varistor
10-90% Load Tolerance +/- 3%
+/- 3%
Turn On Delay <0.5/1s (230/120 VAC)
<0.5/1s (230/120 VAC)
Turn Off Delay <150ms
<150ms
Internal Surge Voltage Protection 35 VDC +/- 5%
35 VDC +/- 5%
Parallel Switching Redundant Systems Only
Redundant Systems Only
Ripple Voltage <100 mV pp
<100 mV pp
Maximum Power Loss 0.9/4.5W (No Load/Load)
0.9/4.5W (No Load/Load)
DC OK (Active) 24V / 20mA
24V / 20mA
Fuse 1.25A/250V
1.25A/250V
Insulation Voltage 3kV
3kV
PHYSICAL
Size - Height 3.90 in
99 mm
Size - Width 0.89 in
22.5 mm
Size - Depth 4.51 in
114.5 mm
Weight 7.4 oz
0.21 kg
Conductor Cross Section AWG 14-24
0.2-2.5mm^2
Vibration (10Hz-150Hz) 2g
0.15mm
Shock (3 directions for 18 ms) 30g
30g

All specifications are at room temperature unless otherwise specified.
NOTES:
[1] In the case of DC applications it is necessary to connect in series an adequate fuse
[2] See appropriate Declaration of Conformance for details
[3] This device is in compliance with the EMC guideline 89/336/EEC and the low voltage guideline 73/23/EEC
[4] This device must be installed in accordance with the specifications of EN60950. It must be possible to switch off the device using a suitable disconnecting device outside the power supply. For example, primary side line protection could be used.




View Spec Sheet: 682A01_A.pdf