Also available in:

 

  

Reciprocating Machinery Protector (RMP)

Model 649A01     

 

Loop Powered 4-20 mA Output Reciprocating Machinery Protector (RMP)

Provides early warning of faults and mechanical looseness in reciprocating compressors, eliminates false trips, outputs exclusive Reciprocating Fault Index (RFI), trends peak acceleration before alarm event occurs, hermetically sealed, 4-20 mA loop powered, field programmable with USB interface (Model 070A82- sold separately)

Reciprocating Machinery Protector Data Sheet

• Output: 4-20 mA
• Machinery RPM Range: 150 to 4800 cpm (2.5 to 80 Hz)
• Sampling Time: 0.2 to 6.4 sec
• Temperature Range: -40 to 212 °F (-40 to 100 °C)
• Excitation Voltage: 15 to 30 VDC

 

Also available in:

 

  

Reciprocating Machiney Protector

Model EX649A71     

 

Loop Powered 4-20 mA Output Reciprocating Machinery Protector (RMP) (CSA/ ATEX Approved)

Provides early warning of faults and mechanical looseness in reciprocating compressors, eliminates false trips, outputs exclusive Reciprocating Fault Index (RFI), trends peak acceleration before alarm event occurs, hermetically sealed, 4-20 mA loop powered, field programmable with USB interface (Model 070A82- sold separately) CSA and ATEX approved, supplied with explosion proof conduit elbow

Reciprocating Machinery Protector Data Sheet

• Output: 4-20 mA
• Machinery RPM Range: 150 to 4800 cpm (2.5 to 80 Hz)
• Sampling Time: 0.2 to 6.4 sec
• Temperature Range: -40 to 212 °F (-40 to 100 °C)
• Excitation Voltage: 15 to 30 VDC

 

Model 649A01 - Reciprocating Machinery Protector
The Reciprocating Machinery Protector (RMP) is both an overall vibration sensor and an impact detector. It provides early warning of impending failure on reciprocating machinery as its peak detection circuitry identifies mechanical looseness.

RMP - Definition of Variables
So what do those programming options mean? This brief document takes a quick look at the variables used to calculate the severity of the impacts the Reciprocating Machinery Protector detects.

RMP Programming Software (Zip File) V1.2
Download our model 649A USB programmable Reciprocating Machinery Protector programming software.

RMP White Paper
This white paper written by lead engineer George Zusman discusses the technology and settings behind IMI's revolutionary Reciprocating Machinery Protector

Smart Vibration Sensors
Brochure details IMI's groundbreaking series of USB programmable vibration sensors. Learn about our smart 4-20 mA vibration transmitter, bearing fault detector, reciprocating machinery protector and vibration switch.