|
High-Temp Charge Mode (to 500 or 900 deg F)
Crystal sensing elements can survive high temperatures but the electronics of a typical ICP sensor cannot. Charge mode sensors use a in-line charge converter downstream away from the heat to convert the charge signal to measureable mV/g units. They are typically sold as a kit consisting of: charge mode sensor, high temp cable and charge amp.
High Temperature Industrial Accelerometer Kit
Model 600A03
Very High Temperature ICP® Accelerometer Kit
Model 600A13
High temperature, charge mode accelerometer kit containing a side exit accelerometer, 10 ft integral hard-line cable, and integral charge amplifier
- Sensitivity: (±5%) 100.0 mV/g (10.2 mV/(m/s²))
- Frequency Range: (±5%) 282 to 240000 cpm (4.7 to 4000 Hz)
- Measurement Range: (Peak) ±50 g (±490 m/s²)
- Mounting: Through Holes (3)
- Electrical Connector: 2-Pin MIL-C-5015
Very High Temperature Industrial Accelerometer
Model 600A14
Industrial charge mode sensor kit including sensor, integral hardline cable, and integral in-line charge amplifier
- Sensitivity: (±5%) 10.0 mV/g (1.02 mV/(m/s²))
- Frequency Range: (±5%) 282 to 240000 cpm (4.7 to 4000 Hz)
- Measurement Range: (Peak) ±500 g (±4900 m/s²)
- Mounting: Through Holes (3)
- Electrical Connector: 2-Pin MIL-C-5015
High Temperature Industrial Accelerometer Kit
Model 600A06
High Temperature Industrial Accelerometer Kit
Model 600A08
High Temperature Industrial Accelerometer Kit
Model 600A07
High Temperature Industrial Accelerometer Kit
Model 600A09
High Temperature Industrial Charge Accelerometer
Model 612A01
High temp., industrial charge output accel, 26 pC/g, 10k Hz, top exit, 2-pin conn., (-65°F to +500°F)
- Sensitivity: (±10%) 26 pC/g (2.6 pC/(m/s²))
- Temperature Range: (Operating) -65 to +500 °F (-54 to +260 °C)
- Electrical Connector: 2-Pin MIL-C-5015
- Electrical Connection Position: Top
- Weight: 2.95 oz (83.6 gm)
|