Sign Up Now
FREE E-Newsletter

Search


About Us

ABOUT SSL CERTIFICATES
Home > Industrial Accelerometers > High Temp > High-Temp Charge Mode (to 500 or 900 deg F) > 600A13
 

 

Also available in:
 
  
Very High Temperature ICP® Accelerometer Kit
Model 600A13     
 
High temperature, charge mode accelerometer kit containing a side exit accelerometer, 10 ft integral hard-line cable, and integral charge amplifier
  • Sensitivity: (±5%) 100.0 mV/g (10.2 mV/(m/s²))
  • Frequency Range: (±5%) 282 to 240000 cpm (4.7 to 4000 Hz)
  • Measurement Range: (Peak) ±50 g (±490 m/s²)
  • Mounting: Through Holes (3)
  • Electrical Connector: 2-Pin MIL-C-5015
 
 
SpecificationsDrawingPictureTemperature 
PERFORMANCE ENGLISH SI
Sensitivity (±5 %) 100.0 mV/g
10.2 mV/(m/s2) [2]
Measurement Range (Peak) ±50 g
±490 m/s²
Frequency Range (±5 %) 282 to 240,000 cpm
4.7 to 4,000 Hz [1][4]
Frequency Range (±10 %) 204 to 300,000 cpm
3.4 to 5,000 Hz
Resonant Frequency 1,380 kcpm
23 kHz [5]
Broadband Resolution (1 to 10,000 Hz) 450 µg
4,415 µm/sec2
Non-Linearity ±1 %
±1 % [6]
Transverse Sensitivity <5 %
<5 %
ENVIRONMENTAL
Overload Limit (Shock) 1,000 g pk
9,810 m/s2 pk
Temperature Range (Accelerometer) -65 to 900 °F
-54 to 482 °C
Temperature Range (Charge Amplifier) -60 to 250 °F
-51 to 121 °C
Temperature Response See Graph
See Graph [5]
Base Strain Sensitivity ≤ 0.05 g/µε
≤ 0.49 (m/s2)/µε
ELECTRICAL
Settling Time (at 70 °F within 1% of bias) ≤ 1.0 sec
≤ 1.0 sec
Discharge Time Constant ≥ .10 sec
≥ .10 sec
Excitation Voltage 22 to 28 VDC
22 to 28 VDC
Constant Current Excitation 2.2 to 20 mA
2.2 to 20 mA
Output Impedance <1,000 Ohm
<1,000 Ohm [5]
Output Bias Voltage 12 to 16 VDC
12 to 16 VDC
Spectral Noise (10 Hz) 11 µg/√Hz
108 (µm/sec2)/√Hz
Spectral Noise (100 Hz) 6 µg/√Hz
59 (µm/sec2)/√Hz
Spectral Noise (1 kHz) 4 µg/√Hz
39 (µm/sec2)/√Hz
Electrical Isolation >108 Ohm
>108 Ohm
PHYSICAL
Size - Diameter 1.5 in
38.1 mm
Size - Height 1.0 in
25.4 mm
Weight (with cable) 9.5 oz
270 gm
Mounting Through Holes (3)
Through Holes (3)
Sensing Geometry Compression
Compression
Housing Material Inconel
Inconel
Sealing Welded Hermetic
Welded Hermetic
Electrical Connector 2-Pin MIL-C-5015
2-Pin MIL-C-5015
Electrical Connection Position Side
Side
Cable Length 10 ft
3 m
Cable Type Integral Hardline
Integral Hardline
SUPPLIED ACCESSORIES:
Model 081A99 Cap Screw (3)
Model ICS-1 NIST-traceable single-axis amplitude response calibration from 600 cpm (10 Hz) to upper 5% frequency (1)
OPTIONAL VERSIONS
EX - Hazardous Area Approval- contact factory for specific approvals

All specifications are at room temperature unless otherwise specified.
NOTES:
[1] 1Hz = 60 cpm (cycles per minute).
[2] Conversion Factor 1g = 9.81 m/s².
[3] See PCB Declaration of Conformance PS023 or PS116 for details.
[4] The high frequency tolerance is accurate within ±10% of the specified frequency.
[5] Typical value.
[6] Zero-based, least-squares, straight line method.
[7] Class I, Div. 1, Groups A, B, C and D; Class II, Div. 1, Groups E, F, and G; Class III, Div. 1
[8] Class I, Div. 2, Groups A, B, C, D
[9] Ex ia IIC T4.
[10] Ex nL IIC T1, II 3 G




View Spec Sheet: 600A13_C.pdf