|
 |
| Process Monitoring & Protection |
Vibration monitoring of plant and process machinery can provide crucial data that will lead to increased productivity and profitability. When vibration levels are monitored, excessive wear and potential failure can be recognized.
IMI's line of 4-20 mA vibration transmitters will interface directly to your PLC, DCS or SCADA control system so data can be easily analyzed. Scaled in inches per second velocity or g's acceleration, these sensors provide 24/7 online protection for key plant machines, reducing downtime. IMI's electronic vibration switches and smart switches eliminate false trips, making it a technically superior option to traditional mechanical shock switches, and are a great way to provide protection for your most critical equipment. |
|
|
Our impact detection products offer the ultimate machine protection. The Bearing Fault Detector provides early warning of impending bearing failure from cracks and spalls. In addition, IMI's DIN rail devices are designed to facilitate vibration monitoring with equipment that is familiar to the process control technician. Signals representing overall vibration levels are monitored with threshold points providing the judgment for alarm, control, or shutdown.
|
| Typical Applications Include: |
• Cooling Towers
• Pumps
|
• Recip. Machinery
• Bearing Condition
|
|
|
Also available in:
Smart Vibration Switch
Model 686B0X
USB programmable electronic vibration switch with 2-pin MIL-C-5015 connector
Series 686B0x Smart Vibration Switch are low cost verstile and fully USB Programable electronic vibration switches that replace unreliable mechanical vibration switches. They are also a significantly lower cost alternative for many electronic vibration switch applications.
- Relay: (Type) SPST, Form A or B MOSFET
- Power Required: 24 to 240 V DC/AC 50/60 Hz
Electronic Vibration Switch
Model 685B0000A10
Electronic vibration switch, internal ICP®, 0-1.5 ips, AC powered, 5A triac relays, dual cord grips
685B series electronic vibration switch with internal sensor, 0-1.5 ips scale factor, 85-245 Vac power, 5A triac relays, dual cord grip connection interfaces.
- Measurement Range: 0 to 1.5 in/sec pk (0 to 38.1 mm/s pk)
- Enclosure: Internal and Remote Reset
- Cable Input: Dual Cord Grips
- Relay: (Alert) Triac 5A, 245 VAC
- Relay: (Alarm) Triac 5A, 245 VAC
- Power Required: 85-245 VAC 50/60 Hz
4-20 mA Output Velocity Sensor
Model 640B01
Industrial vibration sensor, 4 to 20 mA output, 0 to 1 in/sec pk, 3 to 1k Hz, top exit, 2-pin conn.
- Measurement Range: 0.0 to 1 in/sec pk (0.0 to 25.4 mm/s pk)
- Output: 4-20 mA
- Frequency Range: (±10%) 180 to 60000 cpm (3 to 1000 Hz)
Related Products
Bearing Fault Detector
Model 682A05
Bearing Fault Detector, DIN rail mount vibration transmitter (for use w/ICP® sensor), dual 4 to 20 mA outputs for overall and peak vibration
Provides early warning of bearing and gear faults, detects impacting associated with spalling, cracking, and lubrication problems, outputs dual 4-20 mA signals for overall vibration and peak acceleration, provides excitation for ICP® accelerometers.
Product Data Sheet
- Output Range: (Linear Scale) 4 to 20 mA
- Measurement Range: (Fault Detector) 50 g
- Din Rail Mount: 1.38 in (35 mm)
Related Products
Universal Transmitter
Model 682A06
DIN rail mount controller for use with universal inputs, 2 form A relays
Fully programmable universal transmitter with current output, voltage output, and two relay outputs. Provides loop power for 2-wire, 4-20 mA sensors and transmitters, and accepts mA, VDC, RTD, TC, linear resistance, and potentiometer inputs. Fully programmable via detachable display (sold separately- Model 070A80 ), and operates from 19.2 to 300 VDC, or 21.5 to 253 VAC power.
Product Data Sheet
|
|