|
|
Motor Fin Mounting Pads
| These mounting pads are installed in-between the cooling fins of industrial electric motors. They may be welded or held into place with epoxy. Each is tapped with a 1/4-28 threaded hole to accommodate stud mounting of a vibration sensor, however, they may also be used to interface to magnetically mounted sensors. An available assortment of thicknesses and lengths accommodates many motor fin designs. |
 |
 |
| Model 080A123 |
 |
1.375 inch length x 0.25 inch thick |
|
| Model 080A124 |
|
2.125 inch length x 0.25 inch thick |
|
| Model 080A125 |
|
1.625 inch length x 0.5 inch thick |
|
| Model 080A126 |
|
2.375 inch length x 0.5 inch thick |
|
|
|
