|
|
Mounting Pads
Three styles of mounting pads are available to assist with installing vibration sensors onto machine surfaces. Generally, the use of a mounting pad may eliminate the need for drilling and tapping holes into machine surfaces and ensure a consistent location for acquiring vibration data, leading to better measurement practices.
|
 |
Tapped-hole mounting pads accommodate stud mounted sensors, are constructed of stainless steel and may be adhesively attached or welded to machine surfaces. |
|
Flat mounting pads accommodate magnetically mounted sensors, are constructed of stainless steel and may be adhesively attached or welded to machine surfaces. |
|
Quick-connect mounting system reduces sensor mounting time, insures consistent high frequency data collection, and is ideal for route-based monitoring scenarios. The interface pad is constructed of stainless steel and accommodates stud-mounted sensors. The target pad, also constructed of stainless steel, may be stud mounted, adhesively attached, or welded to machine surfaces. The interface and target pads mate with a ¾-turn, quick-engagement thread. |
 |
 |
| Model 080A93 - for stud mounted sensors |
|
Flat-style, 0.75 inch diameter (with 1/4-28 tapped hole) |
|
| Model 080A118 - for stud mounted sensors |
|
Flat-style, 1.0 inch diameter (with 1/4-28 tapped hole) |
|
| Model 080A91 - for stud mounted sensors |
|
Flat-style, 1.375 inch diameter (with 1/4-28 tapped hole) |
|
 |
|
| Model 080A94 - for magnetically mounted sensors |
|
Flat-style, 0.75 inch diameter (no tapped hole) |
|
| Model 080A92 - for magnetically mounted sensors |
|
Flat-style, 1.375 inch diameter (no tapped hole) |
|
 |
|
| Model 080A69 - quick-connect interface pad for stud mounted sensors |
|
1.0 inch diameter (with 1/4-28 tapped hole for sensor and 3/4-turn, female, quick-engagement thread) |
|
| Model 081A69 - quick-connect target pad |
|
1.0 inch hex (with 1/4-28 tapped mounting hole and 3/4-turn, male, quick-engagement thread) |
|
|
