Sign Up Now
FREE E-Newsletter

Search



ABOUT SSL CERTIFICATES

 

Also available in:
 
  
Platinum 4-20 mA Velocity Transmitter
Model 640B01     
 
Platinum Stock Products; Industrial vibration sensor, 4 to 20 mA output, 0 to 1 in/sec pk, 3 to 1k Hz, top exit, 2-pin conn.

IMI guarantees this item can ship immediately else shipping is free.

  • Measurement Range: 0.0 to 1 in/sec pk (0.0 to 25.4 mm/s pk)
  • Output: 4-20 mA
  • Frequency Range: (±10%) 180 to 60000 cpm (3 to 1000 Hz)
 
 
SpecificationsDrawingProduct ManualPictureDownloads 
PERFORMANCE ENGLISH SI
Measurement Range 0.0 to 1 in/sec pk
0.0 to 25.4 mm/s pk [2]
Output 4-20 mA
4-20 mA
Frequency Range (±10 %) 180 to 60,000 cpm
3 to 1,000 Hz [1][3]
Broadband Resolution 0.005 in/sec pk
0.13 mm/s pk [5]
Non-Linearity ±1 %
±1 %
ENVIRONMENTAL
Temperature Range -40 to 185 °F
-40 to 85 °C
ELECTRICAL
Excitation Voltage 12 to 30 VDC
12 to 30 VDC
Load Resistance 50 (Vs-12) ohms
50 (Vs-12) ohms
Settling Time (within 2% of value) <15 sec
<15 sec
Electrical Isolation (Case) >108 Ohm
>108 Ohm
PHYSICAL
Size - Hex 1.0 in
25.4 mm
Size - Height 2.6 in
66 mm
Weight 4.7 oz
131 gm
Mounting Thread 1/4-28 UNF
No Metric Equivalent
Mounting Torque 3 to 5 ft-lb
4 to 7 Nm
Sensing Element Ceramic
Ceramic
Sensing Geometry Shear
Shear
Housing Material Stainless Steel
Stainless Steel
Sealing Welded Hermetic
Welded Hermetic
Electrical Connector 2-Pin MIL-C-5015
2-Pin MIL-C-5015
Electrical Connection Position Top
Top
Electrical Connections (Pin A) 4-20 mA Pos (+)
4-20 mA Pos (+)
Electrical Connections (Pin B) 4-20 mA Neg (-)
4-20 mA Neg (-)
SUPPLIED ACCESSORIES:
Model 081A40 Mounting Stud (1)
Model ICS-4 NIST-traceable single-axis amplitude response calibration from 0 cpm (0 Hz) to upper 10% frequency for 4 - 20 mA output vibration sensor (1)
OPTIONAL VERSIONS
EX - Hazardous Area Approval- contact factory for specific approvals
Hazardous Area Approval DIV II, CL I, GRPS A-D, ExnL, AExnA, IIC T4
Hazardous Area Approval EEx ia IIC T4, -40°C≤Ta≤80°C, II 1 G
Hazardous Area Approval EEx nL IIC T4, -40°C≤Ta≤80°C, II 3 G
Hazardous Area Approval DIV I, CL I, II, III, GRPS A-G, Exia, AExia, IIC T4
M - Metric Mount
Supplied Accessory : Model M081A61 Mounting Stud 1/4-28 to M6 X 1 (1) replaces Model 081A40
RV - Buffered Analog Signal Output - 100 mV/g (±20%)
Electrical Connector 3-Pin MIL-C-5015
Electrical Connections (Pin A) 4-20 mA Pos (+)
Electrical Connections (Pin B) 4-20 mA Neg/Signal Output Neg
Electrical Connections (Pin C) Signal Output Pos
RVVO - Buffered Analog Signal Output - 100 mV/in/sec (±20%)
Electrical Connector 3-Pin MIL-C-5015
Electrical Connections (Pin A) 4-20 mA Pos (+)
Electrical Connections (Pin B) 4-20 mA Neg/Signal Output Neg
Electrical Connections (Pin C) Signal Output Pos

All specifications are at room temperature unless otherwise specified.
NOTES:
[1] 1Hz = 60 cpm (cycles per minute).
[2] Conversion Factor 1 in/sec = 0.0254 m/sec.
[3] Current will fluctuate at frequencies below 5 Hz.
[4] See PCB Declaration of Conformance PS039 or PS053 for details.
[5] Typical.




View Spec Sheet: 640B01_E.pdf
 
Related Products
Polyurethane Jacketed Cable Assembly
Polyurethane Jacketed Cable Assembly
Model 052BR030BZ
Sensor Mounting Pad
Sensor Mounting Pad
Model 080A118