Sign Up Now
FREE E-Newsletter

Search



ABOUT SSL CERTIFICATES

 

Bearing Fault Detector
Model 682A05     
 
Bearing Fault Detector, DIN rail mount vibration transmitter (for use w/ICP® sensor), dual 4 to 20 mA outputs for overall and peak vibration

Provides early warning of bearing and gear faults, detects impacting associated with spalling, cracking, and lubrication problems, outputs dual 4-20 mA signals for overall vibration and peak acceleration, provides excitation for ICP® accelerometers.
Product Data Sheet

  • Output Range: (Linear Scale) 4 to 20 mA
  • Measurement Range: (Fault Detector) 50 g
  • Din Rail Mount: 1.38 in (35 mm)
 
 
SpecificationsDrawingProduct ManualPictureDownloads 
PERFORMANCE ENGLISH SI
Input Signal 100 mV/g
10.2 mV/(m/s2)
Frequency Response (±3 dB) (Overall Vibration) 10 to 1k Hz
10 to 1k Hz
Frequency Response (±3 dB) (Fault) 1 or 5 to 100 kHz
1 or 5 to 100 kHz [1]
Measurement Range (Fault Detector) 50 g
50 g
Output Range (Linear Scale) 4 to 20 mA
4 to 20 mA [1][2]
Output Range (Log Scale) 4 to 20 mA
4 to 20 mA
Sampling Time 7 sec
7 sec
Span (±5 %) 16 mA
16 mA
CONTROL INTERFACE
Power LED Green
Green
ENVIRONMENTAL
Warm Up <2 minutes
<2 minutes
Temperature Range (Operating) 32 to 158 °F
0 to 70 °C
Temperature Range (Storage) -40 to 257 °F
-40 to 125 °C
Humidity Range (Non-Condensing) <95 %
<95 %
ELECTRICAL
Supply Voltage 24 VDC
24 VDC
Current Consumption ≤ 150 mA
≤ 150 mA
Excitation Voltage (±1 V) 24 VDC
24 VDC
Constant Current Excitation (±1 mA) 4 mA
4 mA
Raw Vibration Output +/- 0.01% of Input Vibration
+/- 0.01% of Input Vibration
Load Resistance 500 Ohm
500 Ohm
PHYSICAL
Size - Width 0.9 in
22.5 mm
Size - Height 3.9 in
99 mm
Size - Depth 4.5 in
114.5 mm
Weight 5.2 oz
145.2 gm
Housing Material Polyamide
Polyamide
Screw Terminal Wire Size 24-14 AWG
0.2 - 2.5 mm2
Electrical Connector (input/output) Removable Screw Terminals
Removable Screw Terminals
Electrical Connector (Output, Vibration) BNC Jack
BNC Jack
Din Rail Mount 1.38 in
35 mm

All specifications are at room temperature unless otherwise specified.
NOTES:
[1] Internal Dip switch selectable
[2] Output current voltage will fluctuate at frequencies below 5 Hz.
[3] See PCB Declaration of Conformance PS051 for details.




View Spec Sheet: 682A05_B.pdf
 
Related Products
24 VDC DIN Rail Mount Power Supply
24 VDC DIN Rail Mount Power Supply
Model 682A01
DIN Rail Enclosure
DIN Rail Enclosure
Model 682A00
Platinum Low-cost Industrial ICP® Accelerometer
Platinum Low-cost Industrial ICP® Accelerometer
Model 603C01