|Helping you take better industrial measurements.
IMI industrial sensors are used to spot imbalance, bearing faults and misalignment by measuring machine vibration, providing early fault diagnosis thus reducing downtime. Our vast product line interfaces directly with data acquisition equipment including online systems and handheld data collectors.
We offer a full line of piezoelectric accelerometers, velocity sensors, 4-20 mA vibration transmitters, switches, relays, cables, displays and accessories. Virtually all of our products are certified for use in hazardous areas through CSA and ATEX. We are proud to state that 100% of our products are made in the USA and backed by our Total Customer Satisfaction policy.
Please call our dedicated hotline at 800-959-4464 any time; we are looking forward to helping you take better industrial measurements.
ICP® Pressure Sensor
- Measurement Range: (for ±5V output) 100 psi (689.5 kPa)
- Sensitivity: (±10mV/psi) 50 mV/psi (7.25 mV/kPa)
- Low Frequency Response: (-5%) 0.50 Hz
- Resonant Frequency: >=250 kHz (>=)
- Electrical Connector: 10-32 Coaxial Jack
- Weight: 0.4 oz (11 gm)
Reciprocating Machinery Protector (RMP)
Loop Powered 4-20 mA Output Reciprocating Machinery Protector (RMP)
Provides early warning of faults and mechanical looseness in reciprocating compressors, eliminates false trips, outputs exclusive Reciprocating Fault Index (RFI), trends peak acceleration before alarm event occurs, hermetically sealed, 4-20 mA loop powered, field programmable with USB interface (Model 070A82- sold separately)
Reciprocating Machinery Protector Data Sheet
- Output: 4-20 mA
- Machinery RPM Range: 150 to 4800 cpm (2.5 to 80 Hz)
- Sampling Time: 0.2 to 6.4 sec
- Temperature Range: -40 to 212 °F (-40 to 100 °C)
- Excitation Voltage: 15 to 30 VDC
Bearing Fault Detector PLUS
Bearing Fault Detector PLUS Transmitter, Loop Powered 4-20 mA Output with USB Programming Interface
Provides early warning of Rolling Element Bearing (REB) faults, works on constant & variable speed drives, normalizes output using compensated peak value
Echo® Wireless Vibration Sensor
Echo® Wireless Vibration Sensor
Also available as model RV670A01 which includes analog raw vibration output for time waveform & FFT analyses.
Also available in:
EchoPlus® Wireless Junction Box (8-channels)
Bearing Fault Detector
Bearing Fault Detector, DIN rail mount vibration transmitter (for use w/ICP® sensor), dual 4 to 20 mA outputs for overall and peak vibration
Provides early warning of bearing and gear faults, detects impacting associated with spalling, cracking, and lubrication problems, outputs dual 4-20 mA signals for overall vibration and peak acceleration, provides excitation for ICP® accelerometers.
- Output Range: 4 to 20 mA
- Measurement Range: (Fault Detector) 50 g
- Din Rail Mount: 1.38 in (35 mm)
Mechanical Vibration Switch
Mechanical vibration switch with Patent Pending linear adjust, 0 to 7 G's pk, 0 to 100 Hz
Patent Pending linear adjust design innovation provides better control over trip sensitivity
- Measurement Range: 0 to 7 g pk (0 to 68.7 m/s² pk)
- Cable Input: 3/4-14 NPT
- Relay: 5A Form C 480 VAC