Sign Up Now
FREE E-Newsletter

Search



ABOUT SSL CERTIFICATES

 

Also available in:
 
  
Platinum Low-cost Industrial ICP® Accelerometer
Model 603C01     
 
Platinum Stock Products; General purpose, industrial, ceramic shear ICP® accel, 100 mV/g, 0.5 to 10k Hz, top exit, 2-pin conn., single point ISO 17025 accredited calibration

<p> IMI guarantees this item can ship immediately else shipping is free. </p>

  • Sensitivity: (±10%) 100 mV/g (10.2 mV/(m/s²))
  • Frequency Range: (±3dB) 30 to 600000 cpm (0.5 to 10000 Hz)
  • Measurement Range: ±50 g (±490 m/s²)
  • Electrical Connector: 2-Pin MIL-C-5015
 
 
SpecificationsDrawingProduct ManualPictureDownloads 
PERFORMANCE ENGLISH SI
Sensitivity (±10 %) 100 mV/g
10.2 mV/(m/s2) [2]
Measurement Range ±50 g
±490 m/s²
Frequency Range (±3 dB) 30 to 600,000 cpm
0.5 to 10,000 Hz [4]
Resonant Frequency 1,500 kcpm
25 kHz [5]
Broadband Resolution (1 to 10,000 Hz) 350 µg
3,434 µm/sec2 [5]
Non-Linearity ±1 %
±1 % [6]
Transverse Sensitivity ≤ 7 %
≤ 7 %
ENVIRONMENTAL
Overload Limit (Shock) 5,000 g pk
49,050 m/s2 pk
Temperature Range -65 to 250 °F
-54 to 121 °C
Temperature Response See Graph
See Graph [5]
Enclosure Rating IP68
IP68
ELECTRICAL
Settling Time (within 1% of bias) ≤ 2.0 sec
≤ 2.0 sec
Discharge Time Constant ≥ 0.3 sec
≥ 0.3 sec
Excitation Voltage 18 to 28 VDC
18 to 28 VDC
Constant Current Excitation 2 to 20 mA
2 to 20 mA
Output Impedance <150 Ohm
<150 Ohm
Output Bias Voltage 8 to 12 VDC
8 to 12 VDC
Spectral Noise (10 Hz) 8 µg/√Hz
78.5 (µm/sec2)/√Hz [5]
Spectral Noise (100 Hz) 5 µg/√Hz
49.1 (µm/sec2)/√Hz [5]
Spectral Noise (1 kHz) 4 µg/√Hz
39.2 (µm/sec2)/√Hz [5]
Electrical Isolation (Case) >108 Ohm
>108 Ohm
PHYSICAL
Size - Hex 11/16 in
18 mm
Size - Height 1.65 in
42.2 mm
Weight 1.8 oz
51 gm
Mounting Thread 1/4-28 Female
No Metric Equivalent [1]
Mounting Torque 2 to 5 ft-lb
2.7 to 6.8 Nm
Sensing Element Ceramic
Ceramic
Sensing Geometry Shear
Shear
Housing Material Stainless Steel
Stainless Steel
Sealing Welded Hermetic
Welded Hermetic
Electrical Connector 2-Pin MIL-C-5015
2-Pin MIL-C-5015
Electrical Connection Position Top
Top
SUPPLIED ACCESSORIES:
Model 081A40 Mounting Stud
Model ICS-2 NIST-traceable single-axis single-point amplitude response calibration at 6000 cpm (100 Hz) (1)
OPTIONAL VERSIONS
EX - Hazardous Area Approval- contact factory for specific approvals
Hazardous Area Approval Cl I, Div 2, Groups A, B, C, D; ExnL IIC T4, AExnA IIC T4
Hazardous Area Approval EEx nL IIC T4, -40°C≤Ta≤121°C, II 1 G
Hazardous Area Approval Cl I, Div I, Groups A, B, C, D; Cl II, Div I, Groups E, F, G; Cl III, Div I
Hazardous Area Approval Ex ia IIC T4, AExia IIC, T4
Hazardous Area Approval EEx nL IIC T4, -40°C≤Ta≤121°C, II 3 G
M - Metric Mount
Supplied Accessory : Model M081A61 Mounting Stud 1/4-28 to M6 X 1 (1)
TO - Temperature Output
Temperature Output Range 36 to 250 °F
02 to 121 °C
Temperature Scale Factor 5.56 mV/°F + 32
+10 mV/°C
Electrical Connector 3-Pin MIL-C-5015
Electrical Connections (Pin A) Acceleration Output
Electrical Connections (Pin B) Ground
Electrical Connections (Pin C) Temperature Output
Size - Height 1.86 in
47.2
Weight 2.0 oz
56.7

All specifications are at room temperature unless otherwise specified.
NOTES:
[1] 1/4-28 has no equivalent in S.I. units.
[2] Conversion Factor 1g = 9.81 m/s².
[3] See PCB Declaration of Conformance PS023 or PS060 for details.
[4] The high frequency tolerance is accurate within ±10% of the specified frequency.
[5] Typical.
[6] Zero-based, least-squares, straight line method.




View Spec Sheet: 603C01_H.pdf
 
Related Products
Polyurethane Jacketed Cable Assembly
Polyurethane Jacketed Cable Assembly
Model 052BR010BZ
Curved Surface Magnet
Curved Surface Magnet
Model 080A131
Sensor Mounting Pad
Sensor Mounting Pad
Model 080A93