Sign Up Now
FREE E-Newsletter

Search



ABOUT SSL CERTIFICATES

 

Also available in:
 
  
Platinum Precision Industrial ICP® Accelerometer
Model 625B01     
 
Platinum Stock Products; Ring-style, industrial, ceramic shear ICP® accel, 100 mV/g, 0.2 to 10.5k Hz, side exit, 2-pin conn., frequency sweep ISO 17025 accredited calibration

IMI guarantees this item can ship immediately else shipping is free.

  • Sensitivity: (±5%) 100 mV/g (10.2 mV/(m/s²))
  • Frequency Range: (±5%) 30 to 390000 cpm (0.5 to 6500 Hz)
  • Frequency Range: (±3dB) 12 to 630000 cpm (0.2 to 10500 Hz)
  • Measurement Range: ±50 g (±490 m/s²)
  • Mounting: Through Hole
  • Electrical Connector: 2-Pin MIL-C-5015
 
 
SpecificationsDrawingProduct ManualPictureTemperature 
PERFORMANCE ENGLISH SI
Sensitivity (±5 %) 100 mV/g
10.2 mV/(m/s2) [2]
Measurement Range ±50 g
±490 m/s²
Frequency Range (±5 %) 30 to 390,000 cpm
0.5 to 6,500 Hz [4]
Frequency Range (±10 %) 22 to 450,000 cpm
0.37 to 7,500 Hz
Frequency Range (±3 dB) 12 to 630,000 cpm
0.2 to 10,500 Hz
Resonant Frequency 1,500 kcpm
25 kHz [5]
Broadband Resolution (1 to 10,000 Hz) 50 µg
491 µm/sec2 [5]
Non-Linearity ±1 %
±1 % [6]
Transverse Sensitivity ≤ 5 %
≤ 5 %
ENVIRONMENTAL
Overload Limit (Shock) 5,000 g pk
49,050 m/s2 pk
Temperature Range -65 to 250 °F
-54 to 121 °C
Temperature Response See Graph
See Graph [5]
Enclosure Rating IP68
IP68
ELECTRICAL
Settling Time (within 1% of bias) ≤ 8.0 sec
≤ 8.0 sec
Discharge Time Constant ≥ 1.0 sec
≥ 1.0 sec
Excitation Voltage 18 to 28 VDC
18 to 28 VDC
Constant Current Excitation 2 to 20 mA
2 to 20 mA
Output Impedance <100 Ohm
<100 Ohm
Output Bias Voltage 8 to 12 VDC
8 to 12 VDC
Spectral Noise (10 Hz) 2.5 µg/√Hz
24.5 (µm/sec2)/√Hz [5]
Spectral Noise (100 Hz) 0.8 µg/√Hz
7.8 (µm/sec2)/√Hz [5]
Spectral Noise (1 kHz) 0.5 µg/√Hz
4.9 (µm/sec2)/√Hz [5]
Electrical Protection RFI/ESD
RFI/ESD
Electrical Isolation (Case) >108 Ohm
>108 Ohm
PHYSICAL
Size - Diameter 1.36 in
35.1 mm
Size - Height 1.13 in
28.7 mm
Weight 5.1 oz
145 gm
Mounting Through Hole
Through Hole
Mounting Thread 1/4-28 Male
Not Applicable [1]
Mounting Torque 2 to 5 ft-lb
2.7 to 6.8 Nm
Sensing Element Ceramic
Ceramic
Sensing Geometry Shear
Shear
Housing Material Stainless Steel
Stainless Steel
Sealing Welded Hermetic
Welded Hermetic
Electrical Connector 2-Pin MIL-C-5015
2-Pin MIL-C-5015
Electrical Connection Position Side
Side
SUPPLIED ACCESSORIES:
Model 080B45 Thermal Boot (1)
Model 081A73 Captive mounting bolt 1/4-28 x 1.34" (1)
Model ICS-1 NIST-traceable single-axis amplitude response calibration from 600 cpm (10 Hz) to upper 5% frequency
OPTIONAL VERSIONS
CS - Canadian Standards Association Approved Intrinsically Safe
Hazardous Area Approval Cl I, Div I, Groups A, B, C, D; Cl II, Div I, Groups E, F, G; Cl III, Div I
Hazardous Area Approval Ex ia IIC T4, AExia IIC, T4
Hazardous Area Approval Cl I, Div 2, Groups A, B, C, D; ExnL IIC T4, AExnA IIC T4
LB - Low Bias Voltage
Output Bias Voltage 6 to 8 VDC
Excitation Voltage 12 to 28 VDC
Measurement Range 35 g
343 m/s²
M - Metric Mount
Supplied Accessory : Model M081A73 Mounting Bolt M6 x 1.00
TO - Temperature Output
Temperature Output Range 36 to 250 °F
02 to 121 °C
Temperature Scale Factor 5.56 mV/°F + 32
+10 mV/°C
Electrical Connector 3-Pin
Electrical Connections (Pin A) Acceleration Output
Electrical Connections (Pin B) Ground
Electrical Connections (Pin C) Temperature Output

All specifications are at room temperature unless otherwise specified.
NOTES:
[1] 1/4-28 has no equivalent in S.I. units.
[2] Conversion Factor 1g = 9.81 m/s².
[3] See PCB Declaration of Conformance PS023 for details.
[4] The high frequency tolerance is accurate within ±10% of the specified frequency.
[5] Typical.
[6] Zero-based, least-squares, straight line method.




View Spec Sheet: 625B01_H.pdf
 
Related Products
Polyurethane Jacketed Cable Assembly
Polyurethane Jacketed Cable Assembly
Model 052BR010AC
Curved Surface Magnet
Curved Surface Magnet
Model 080A131